What Causes Mold In Ductwork?

Comments

Post a Comment

Popular posts from this blog

Why You Need To Change Your Furnace Filter in the Summer

Image
Changing the furnace filter in summer strikes a lot of people as pretty weird. It only takes one good heatwave to make people forget that they even have a furnace, let alone one that needs preventative maintenance in the summertime. Tell them to change the filter in July and, seeing as the furnace is the last thing they want to use right now, they’ll just forget about it. The thing is, the way your (HVAC system) operates makes changing your furnace filter in summer a necessary bit of preventative maintenance ! Here’s why you shouldn’t neglect it, even as the heat pushes to 40 degrees. Air Conditioning and the Furnace: Closely Connected The Importance of the Furnace Filter Most HVAC systems have a lot of ductwork, through which both the cool air from your central air conditioning and the heated air coming from your furnace. The ducts also allow your system to exchange air from outside and within your home. Your system is doing a lot of work using the same pathways, which means tha...
Read more

How Many Years Does A Hot Water Heater Last?

Image
A home is dependent on the water heater. Think about cold showers, washing the floors with freezing water, and there being no hot water for the dishes. These unpleasant scenarios are why you need to keep your hot water tank in working order ! A water heater that is properly installed and maintained should last up to 12 years; a tankless heating system should last up to 20. They don’t usually work longer than that lifespan because of the natural sediment that flows in through the municipal system. While both tank and tankless water heaters have ways of dealing with this sediment, these protective measures will eventually break down. What Causes Hot Water Heater Breakdowns? Like every other appliance, water heater tank wears down through constant use. As natural particles in water move through the system, they break the glass that lines the inside to protect the metal. The glass is very thin, so to keep the tank from corroding sooner than it has to, a device known as an anode rod a...
Read more

Is A Two-Stage Furnace Worth The Money?

Image
Consumers sometimes ask about whether two-stage furnaces are worth the extra expense. It depends on your situation as one heating solution doesn’t fit every home. It helps to know what separates a two-stage system from the more common one-stage furnaces!   What Is A Two-Stage Furnace? The terms one-stage and two-stage furnace refer to the burner section inside the furnace and the valve that releases propane or natural gas to it. Average one-stage furnaces have a valve that only opens and closes, whereas two-stage heating has one more valve setting. It’s commonly called low fire, and the furnace starts in this first stage and runs at 70 or 80% of the full rated capacity.  The furnace will then enter the second stage, also known as high fire, only when needed. It determines whether to enter the second stage based on the time the furnace has been operating or if the thermostat indicates that it has to raise the temperature more than two degrees. So if you have a two-st...
Read more