Air Conditioner Maintenance 101

Comments

Post a Comment

Popular posts from this blog

Easy Air Conditioner Savings For The Summer

Image
A super-high hydro bill is almost as seasonal as swimsuits and winter sweaters. You’ve almost come to expect it, so when the temperature soars outside, you make sure it plunges inside and take the hit when the money’s due. It really doesn’t have to be this way, though, and the small changes you make this summer will guarantee air conditioner savings! Check The Thermostat Location While you might not think twice about where your thermostat is set, it can really make a huge difference in how it reads the temperature of the air in your home. This is because the thermostat registers the temperature around the wall on which it’s placed, not the air in the middle of the room you’re currently sitting in! Rather inconvenient, but here we are. You’ll want the thermostat on a central wall in your home. Keep it away from drafts, doorways that lead to the outdoors, direct sunlight, skylights, and furniture, all of which can influence the temperature around the thermostat These can all activat...
Read more

Is A Two-Stage Furnace Worth The Money?

Image
Consumers sometimes ask about whether two-stage furnaces are worth the extra expense. It depends on your situation as one heating solution doesn’t fit every home. It helps to know what separates a two-stage system from the more common one-stage furnaces!   What Is A Two-Stage Furnace? The terms one-stage and two-stage furnace refer to the burner section inside the furnace and the valve that releases propane or natural gas to it. Average one-stage furnaces have a valve that only opens and closes, whereas two-stage heating has one more valve setting. It’s commonly called low fire, and the furnace starts in this first stage and runs at 70 or 80% of the full rated capacity.  The furnace will then enter the second stage, also known as high fire, only when needed. It determines whether to enter the second stage based on the time the furnace has been operating or if the thermostat indicates that it has to raise the temperature more than two degrees. So if you have a two-st...
Read more

How Do I Know When I Need A New Thermostat?

Image
Many problems with HVAC systems start with the thermostat. When this important piece of equipment fails to control the temperature properly, it can trick you into thinking you have a worse problem then what’s actually wrong. If you’re struggling with the following problems, don’t tear apart your furnace to find the issue – the fix could be a whole lot simpler! Your HVAC System Won’t Turn On  The biggest tell of a faulty thermostat is that your home’s heating and cooling system won’t turn on at all. Believe us, you’ll know when this becomes the problem. Before you get worried about a major HVAC repair, just have a look at the thermostat first; something could be preventing it from sending signals to your furnace and air conditioner. The HVAC System Doesn’t Respond To Settings Changes If your heating and cooling isn’t responding to a change in the temperature or setting almost immediately, it’s very likely that something is wrong with your thermostat’s ability to communicate wit...
Read more